Paypal Account Full Active For BD 'Not Limited Paypal'

Paypal Account Full Active BD Not Limited Paypal Account Sell

Payonner Account And Master Card Full Active To Paypal Account Sell

Paypal Account Not Limited Account sell  Call Me:01966128447 
 My Email:md.iqbalkhan708@hotmail.com

My Paypal Account:md.iqbalkhan708@hotmail.com

My Payonner Account:md.iqbalkhan708@hotmail.com

symphony d53i Flash File With out password

Download Here

Samsung G360H Cert File Download 1000% Okay

Download Here

Samsung GT-S7582 cert File Download 100% okay With Out Password

Download Here

Smart S400 Flash file 10000% test

Smart S400

Download

Symphony W100 Orignal Flash File Without password

ITS OTHERS BRAND MODEL FILE BUT NO PROBLEM I M TESTED

DOWNLOAD

Worlds First only On GpgForum Samsung Infenion set Factory Application Not working /showing solution

Worlds First only On GpgForum Samsung Infenion set Factory Application Not working /showing solution

Hear Is the solution for Samsung Infenion base handset like c3312,e2652,s3310i,c3200...etc for After flash compony application like opera mini ,games,etc..set not showing or Not opening

Kindally use following Guide

Simpally Press Thanks if it is helpfull to you

SP Flash Tool alternative for flashing MT6582, MT6589, MT6592, MT6589T, MT6577

This is for flashing firmware, ROMs, CWM, recoveries or anything else you may need to flash. It's an alternative app to SP Flash Tool. Actually this one is branded by Mediatek themselves. It's called simply 'Flash Tool'.

It can be used with the same scatters that MTK Droid Tools creates and that SP Flash Tool is compatible with.

http://ge.tt/4wpg7UA...7UA1/v/0?c

How To Create a scatter file for android MT6595, MT6582, MT6589, MT6592, MT6577, MT6589T, MT6572

If you're looking for a tutorial on how to make a scatter file for MTK6582, MTK6595, MTK6589, MTK6592, MTK6577, MTK6589T, MTK6572, then you've come to the right place.

What you'll need:

• MTK / MediaTek based smartphone
• USB Data Cable
• USB ADB VCOM drivers
• MTK Droid Tools

What to do:

• Step 1 - Enable USB debugging
• Step 2 - Install the PDANet USB ADB VCOM drivers - http://www.gizbeat.c...r-windows/
• Step 3 - Download, extract, and run the latest version of MTK Droid Tools.

• Step 4 - Your phone should be on at this point. Connect the data USB cable to your phone and wait about 10 seconds. Eventually you should see the phone's information come up.
• Step 5 - Click 'blocks map'. A new window should open with all your phone's block information and where each portion of your firmware is stored on ROM.

Step 6 - Click 'create scatter file'. Navigate to where you want to save it. Save it in a place where you won't lose it. If you need it for flashing firmware, save it in the folder of the firmware. If you need it for flashing a recovery, save it in the folder with the recovery.

UFSx+HWK Install Files Mirrors & Install Instructions

1. Uninstall ALL previous versions, you MUST uninstall HWK Suite BEFORE trying to uninstall HWK Support Suite Setup.
2. Install UFSx Support Suite Setup v2.3.0.5
3. Connect your UFSx+HWK before running the UFSx Control Panel
4. Run UFSx Control Panel
5. Switch to the "Hardware" Tab
6. If you only have one UFSx connected it will be selected, if more than one, select the check box next to the required UFSx. You can click "Scan Boxes" to refresh the list if you have connected further boxes since opening the Control Panel
7. Click "Check Box"
8. Click "Update Box"
9. Click "Check Box" - Make sure "Box Status" = "True" or "Bad Software" and "Server Status" = "Support Ok", before proceeding
10. Switch to the "Software" Tab
11. Amend "Application Install Path" and/or "Nokia Install Path", if required.
12. Click "Check Server"
13. Click "Install"
14. If you have more than 1 UFSx+HWK run steps 5-13 for each UFSx+HWK (NOTE: You must install something at step 13)


How to install same UFSx+HWK to 2nd PC.

Same as above and you must complete ALL steps.


How to add further UFSx+HWK after initial install.

Steps 4-13 as above


DHLT Files - Samsung Fast Code Calc Tables

_DHT.part01.exe - _DHLT.part01.exe - _DHLT.part01.exe
_DHT.part02.rar - _DHLT.part02.rar - _DHLT.part02.rar
_DHT.part03.rar - _DHLT.part03.rar - _DHLT.part03.rar
_DHT.part04.rar - _DHLT.part04.rar - _DHLT.part04.rar
_DHT.part05.rar - _DHLT.part05.rar - _DHLT.part05.rar
_DHT.part06.rar - _DHLT.part06.rar - _DHLT.part06.rar
_DHT.part07.rar - _DHLT.part07.rar - _DHLT.part07.rar



DHLT Files
Should be extracted and installed too:-
C:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT for 32bit PCs
C:\Program Files (x86)\SarasSoft\UFS\UFS_SAMs\_DHT for 64bit PCs

MTK6592 / MTK6582 / MTK6589 / MTK6577 / MTK6575 / MTK6572 ADB PDAnet VCOM Drivers

Drivers required to properly communicate with your MTK Phone for rooting etc...

These ADB drivers from PDA Net are the easiest to install and will work with most all MTK phones.

v4016 MTK65xx ADB VCOM Driver Download


v4150 MTK65xx ADB VCOM Driver Download

How to Update Samsung Galaxy S Duos 2 S7582 Android 4.2.2 Jelly Bean and Install CWM Recovery

Samsung Galaxy S Duos 2 S7582 users who wish to root and install ClockworkMod Recovery (CWM) on their devices, may follow our step-by-step guide.

This tutorial uses CWM recovery released by XDA-Developers member, ahmedhameed. The CWM recovery allows Galaxy S Duos 2 users to root their devices without any difficulty.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy S Duos 2 on your computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S Duos 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CWM recovery works only on the Galaxy S Duos 2 (GT-S7582). Applying this on any incorrect variant might brick the device. Verify the model number of the Galaxy S Duos 2 by selecting Settings >> About Phone.

Files Required
1. CWM (recovery.tar.md5)
2. SuperSu (UPDATE-SuperSU-v1.34.zip) or the latest version
3. Odin 3.07

Steps to Install CWM Recovery on Galaxy S Duos 2 S7582
Step 1: Extract the Odin 3.07 file using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Copy the SuperSU .zip file to the SD card of your phone.
Step 3: Switch off the Galaxy S Duos 2. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy S Duos 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Make sure that the F. Reset Time, Auto Reboot and Re-Partition checkboxes are NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Steps to Root Galaxy S Duos 2 S7582 via CWM Recovery
Step 9: Boot the device into CWM recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once the installation process completes, return to main recovery menu and select "reboot system now".

Samsung Galaxy S Duos 2 S7582 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

Screenshot: Install CWM recovery via Odin

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

How to Unbrick Samsung Android Phones with One-Click UnBrick

Normally Samsung android phones are so secure to flash. But you are unlucky and got your phone bricked during flashing, rooting or upgrading.

Here is a good news for You – A developer come up with a software called One-Click UnBrick for Samsung android phones. This small utility uses Odin to repair our Samsung phones. Almost all Samsung phones with android éclair and above can be repair with this tool (few exceptions – it is working on some Android 1.5 too)


Requirements

• Install Samsung USB Driver for Mobile Phones  on the computer.
• Install Java Runtime Environment (JRE) on the computer.
• Download One-Click UnBrick tool.

Complete Step-By-Step Instructions:

1. Extract the "One-Click.jar" file using WinRAR/7-Zip/WinZip or any other extracting tool. Now you will get a "OneClick" folder.
2. Copy the "OneClick.jar" file and paste it into the "OneClick\heimdalloneclick\resources\HeimdallPackage" folder.
3. Right-click on the "oneclickloader.exe" file and choose "Run as Administrator".
4. Proceed with the installation of Heimdall.
5. After the installation is complete, you will see the the One-Click UnBrick interface.
6. Connect the phone to computer via USB and click on the "unsoft brick" button to recover your bricked Samsung android phone.
   

This method was originally posted via XDA-Developer original threa

How to Root Galaxy Fame S6810 on Android 4.1.2 Jelly Bean Firmware

Samsung has delivered its latest Android 4.1.2 Jelly Bean firmware update for the Galaxy Fame with model number GT-S6810 in several countries. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy Fame S6810 users who have already installed their devices with official Android 4.1.2 Jelly Bean firmware, may root their devices using the tutorial below.

This tutorial uses Motochopper file released by Recognized XDA-Developers, djrbliss. The Motochopper file allowing Galaxy Fame S6810 users to root their devices easily.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Fame on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 per cent.
5. The Root Package file works only on the Samsung Galaxy Fame with model number GT-S6810. Applying these to any incorrect variant might brick the device. Verify the model number of the Galaxy Fame by navigating to Settings >> About Phone.

File Required
1. Root Package (Mirror Link) for Galaxy Fame S6810 (motochopper.zip)

Steps to Root Galaxy Fame S6810 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract the motochopper.zip file using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Connect the phone to the computer using USB cable.
Step 3: If you are using Windows, navigate to the extracted directory and execute "run.bat". If you are using Linux or OS X, navigate to the extracted directory in a terminal and execute "./run.sh".
Step 4: Follow the on-screen instructions. Once the rooting procedure completes, the phone will boot into normal mode. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Fame S6810 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Tested working on Galaxy Fame S6810 with Android 4.1.2 XXAME2 Jelly Bean firmware, should work with other Jelly Bean firmware. Try it and let us know.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Easy Work with Android modified Cable

Android modifide Cable
use this cable, no need press any boot key in any spd,mtk android and many other phones


insert this usb cable(switch off with battery) and see in device manager,your mobile is connected


1-VCC
2-D-
3-D+
4- EMPTY IN CA101 NOKIA USB CABLE
5 GND


JOINT GND TO EMPTY POINT OR TWO WIRE SOLDERING, IF YOU JOINT BOTH WIRE YOUR CABLE IS MODIFIDE CABLE,IF DISSCONNECTED YOUR CABLE IS NORMAL CA101 CABLE


joint this empty point to gnd in ca 101 nokia usb cable













how to use the cable for read write flash or write imei


read write flash


1- open volcano
2-select spd tab and coreect boot acording to your phone cpu 6600,6610,6800,6820,6530
3-tick any option read,write,format
4-untick auto detact pinout
5-insert this usb cable
6-see in device manager com port
7 -com port automaticly refresh in volcano software(if not refresh automaticly please refresh or select manuly)
8-run

[Tutorial] How to write IMEI in All SPD Phones having P-05b Connector

How to write IMEI with VolcanoBox

in All SPD Phones having P-05b Connector



Before Repairing IMEI, User must follow these -

User must have Win Xp (Service Pack 3) for best results
Install Correct Drivers for your handset.
If you dont have correct driver, then download from below links -


SPD Android Usb Driver for win7/win8 (64bits)

SPD Android Usb Driver for winXP/win7 (32bits)

SC6530/6531/6610 New Usb Driver for win7/win8 (64bits)

SC6530/6531/6610 New Usb Driver for winXP/win7 (32bits)


Now Make These Settings -

* Go to Detect tab & Select [D+/D-]SPD/Anyka in Detect Type.

* Manually put pinouts (Pin2= D- Pin3= D+ Pin5= GND) as given below -




* After putting pins like this, Connect Handset on Volcano Main Cable.

* Attach Power cables also & Press "Set Pinout" button.

* After Pinouts Setting Complete, Remove Cable from Box Socket (Dont Remove Cables from Handset)
See in pic below -





Now do as stated here -

Code:

Step 1 - Open Volcano tool and go to spd tab and (Enable IMEI Option)
Step 2 - Tick "Write IMEI" and Untick "Auto-detect pinouts"
Step 3 - Set R/W IMEI to "COM" and press RUN Button(New Tool will Open)
Step 4 - Select "USB" in ComP and Fill IMEI in boxes.
Step 5 - Press "Write IMEI" button
Step 6 - Now Connect the cable back to the BOX.
Step 7 - wait for 2-3 minutes..you see message "Write IMEI done".

SPD 6531 & All Spd imei Write With New Magic Usb Cable

HOW TO MAKE SPD IMEI WRITE Cable - only disconnect usb + supply (vcc) your cable is ready

















Write imei usb disconnect usb + supply (vcc)
usb cable connect only D+ D- GND
1-go to spd tab
2-R/W IMEI chooses com
3-untick auto detect pinout
4-press these key from keybord to enable imei alt+ctrl+i
5-click on write imei
6-click run
7-new window will be open
8-choose usb NOT SELECT ANY COM PORT
9-write imei in box
10-insert usb cable in mobile without battery
11-click on write imei
12- then insert battery, no need press any boot key and wait 10 secnd
imei write successfully

Western D50 Flash File 100% tested

western D50.rar - 4shared.com - online file sharing and storage - download - Dipankor-ctg

HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano(Tested On SPD 6531)

HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano(Tested On SPD 6531)

Requirement
(1)usb cable NOKIA 5130
(2)any RJ45 Cable
(3)Iron
(4)Solding Wire

first remove usb jig FROM USB CABLE and sold with any rj45 cable All five wire .volcano box will detect auto pin D+ D-


MAKE THIS TYPE EASY CABLE OTHER JIGS AND TEST IT WITH VOLCANO BOX AND SHEAR HERE YOUR EXPERIENCE
VIDEO LINK
Easy Cable RJ45 To USB converter For Volcano - Download - 4shared
http://www.4shared.com/rar/BC2UC61N/...B_convert.html




rj45 tx rx find to easy .
but rj45 usb D+ D- how to do
pls clear which rj45 8pin use usb 5 pin.

Western d25 flash fileTested

http://www.ziddu.com/download/20333188/westernd25.rar.html